To Turn On The Power - TAJIMA TFMX-IIC User Manual

To turn ON the power

1-2.
To turn ON the power
After turning on the power, the screen will switch as the figure below. Wait for a while until the power
(1)
starts up.
Award modular BIOS ********
***************
***************
***************
***************
***************
Press DEL to set up
>> Now System Loading...40[%]!!
*********************
When the power starts up, the following message will appear. Then, press SET (this message will not be
(2)
displayed in L-spec. machine).
When performing this operation, do not put your hands etc. on the machine table. Moving
frame could injure you.
TAJIMA_W
Frame origin memory
Frame origin memory
is executed.
is executed
"YES" >> SET
"YES">>SET
TAJIMA_W
36
Microsoft
Windows CE.net
T*MX-C
!
CAUTION
This operation is to grasp accurately the frame
14117
position and it is displayed every time when the power
is turned ON.
This message will be displayed only when "Frame
Origin Memory with the power-ON" is set to "YES".
(→p.160)
When you do not want to display this message, set to
0
"NO".
Press SET.
The frame will move and return to the original position.
Main screen
14117
0
Software version installed in the machine will
be displayed.
Chapter 4