Table of Contents
Advertisement
To adjust finishing of embroidering
7.
To adjust finishing of embroidering
7-1.
To adjust driving error of the frame (Backlash)
This function corrects error of finished stitching generated by Backlash. Backlash means the play generated
by the shock in the parts at the drive system or around the frame when return stitches are executed.
Explanation on the screen
7-1-1.
4 Backlash
F1
X
Y
Correcting value in horizontal
[a]
Stitch after correction
Original stitch
[b]
Correcting value in vertical
[Example of combination of X/Y correcting value]
Original stitch
104
0.0
-0.5 0.5 [mm]
0.0
-0.5 0.5 [mm]
-0.5 mm
0.5 mm
Original stitch
-0.5 mm
Stitch after correction
0.5 mm
Stitch after correction
0.5 mm
[a]
[b]
Original stitch
Stitch after correction
Stitch after correction
0.5 mm
Original stitch
The left illustration shows an example
that the values are X:0.5 and Y:0.5.
Chapter 5
Advertisement
Table of Contents
