To make optional device available for use
1.
To make optional device available for use
Before using optional devices, be sure to check the setting condition for each device.
1-1.
Sequin Device (common to III and IV )
This is a setting for making sequin device available for use. For details of the device, refer to the separate
manual "Sequin Device".
Explanation on the screen
1-1-1.
7 Sequin device
SET
F3
L
R
[a]
Type of Sequin device equipped to left side
: Not to use the device
SQ: High speed Sequin device
SQ3: Sequin device III (Up/down-by-motor type)
When you select "SQ3" in TFMX-C, TWMX-C, color change speed will become 1/2 of
normal speed.
SQ4: Sequin device IV (Up/down-by-air type)
Air compressor is required.
Type of Sequin device equipped to the right side
[b]
The contents of settings are the same as [a].
How to operate
1-1-2.
The following is an example of equipping Sequin device III to the left side.
Set to main screen.
(1)
(2)
To press F3 key while pressing SET
190
[a]
/SQ/SQ3/SQ4
[b]
/SQ/SQ3/SQ4
2 Weak Brake
Chapter 8