Switching Of Input Voltage (Some Spec. Only) - TAJIMA TFMX-IIC User Manual

Spec. of the machine
1-3.

Switching of input voltage (some spec. only)

The following label (either of one) is stuck at the lower part of the power supply card. Only the model
on which label No.3 is stuck can switch input voltage.
Exclusive for single-phase/100 V
However, since the setting is performed according to your voltage spec. at shipment, it is not
necessary to switch input voltage in usual usage. Perform switching of input voltage only in the
following condition.
(a) When the machine was moved for installation to the place whose voltage spec. is different from
(b) When you replace power supply card and connection of the connector CN11 is different from
How to switch
1-3-1.
Since there could be danger of electric shock, perform the work after turning OFF the power.
In case of TFMX-C single-head machine and TWMX-C models
Detach the stand cover.
(1)
(2) Change connection of the connector CN11 on the power supply card.
Stand cover
QS10
Label No.1
For 3-phase/200 V
that at shipment
your voltage spec.
Power supply card
Label No.3
Power supply card
Label No.3
Label No.2
Single-phase
100 V or 200 V
!
DANGER
TFMX-C single-head machine
CN11
TWMX-C
CN11
Chapter 11
Label No.3
[Connection of CN11]
In case of 100 V series
In case of 200 V series
[Connection of CN11]
In case of 100 V series
In case of 200 V series
1
2
3
4
5
6
7
8
9
10
11
239