To Change Moving Speed Of Needle Bar Case (Color Change Speed) - TAJIMA TFMX-IIC User Manual

To increase embroidering efficiency
How to operate
8-2-2.
The following is an example that Jump Code Combination is set.
To open screen
(1)
To set Jump Code Combination
(2)
8-3.

To change moving speed of needle bar case (Color change speed)

This function applies to TFMX-C, TWMX-C only. When sequin device III is equipped, the machine does not
have this function.
Screen
8-3-1.
2 Color Change Speed
How to operate
8-3-2.
The following is an example that Color Change Speed is set to "High".
Press the F5 key within 10 seconds after turning ON the power, and keep on pressing the key. When the
(1)
window of "F5+PW" starts up, release it.
(2) To select color change speed
118
5 Jump Code Combination
YES
High
NO
Low
High: High speed (usual setting)
Low: Low speed
Chapter 5