To Set Embroidery Speed Within Speed Limit Section (Revolution Limit) - TAJIMA TFMX-IIC User Manual

To set the embroidery speed
3-2.

To set embroidery speed within speed limit section (Revolution limit)

Set the maximum speed of the section where the embroidery speed is restricted.The area where speed was
restricted in the design is surrounded by the following function code.
Function Name
Low Speed Start Stitch
Low Speed End Stitch
3-2-1. Screen
2 Revolution Limit
F2
Low Speed Code
How to operate
3-2-2.
The following is an example that the maximum speed of the section between the function codes Low_S to
Low_E is set to "700".
To open screen
(1)
(2) To select maximum speed
90
Function Code
Low_S
Low_E
500
[rpm]
2 Revolution Limit
700
Maximum speed of section between function codes
Low_S to Low_E
Chapter 5