Registration Of A Design Into The Machine Memory; To Use Usb Memory (Data Input Usb) - TAJIMA TFMX-IIC User Manual

Registration of a design into the machine memory

3.

Registration of a design into the machine memory

Register designs in the machine memory by the following methods.
Use USB memory
(1)
(2) Use personal computer (DG/ML by Pulse is necessary)
3-1.

To use USB memory (Data Input USB)

Register designs saved in the USB memory into the machine memory. The maximum number of stitches per
design is 1,000,000 stitches.
Screen
3-1-1.
[a]
A
[b]
[c]
[a] Folder layer
The folder in the USB memory can be read up to three levels. The total of folders and designes
that can be read per 1 layer directory is 255 designs.
: Root folder
: Folder (First level)
: Folder (Second level)
: Folder (3rd layer directory)
Folder
[b]
Design
[c]
File name
Design name
(Up to 8 characters)
4 Data Input (USB)
Cap frame Border frame
T3 T
TBF DST
*** ***
****** ******
**** ****
Saving format of design
T3
Extension
G001.TCF
TAJIMA_W
14117
Total stitch number of design
(Within 1,000,000 stitches)
Folders and designs saved in the USB
T2
memory will be displayed. The design except
the one shown at left will be displayed
TCF
***
****** depending on a saving format of the design.
****
T
DST
***
******
****
The extension differs depending on the
saving format of the design.
T3: TCF
T2: TBF
T: DST
For saving format of the design, refer to the
detail page.(→p.31)
Chapter 4
1
2
3
4
5
6
7
8
9
10
11
41