Default Communication Parameters - Kramer EXT3-C-XR-TR User Manual

Default Communication Parameters

RS-232
Baud Rate:
Data Bits:
Stop Bits:
Parity:
Command Format:
Example (Route video input 2 to the output):
IP DHCP ON
To reset the IP settings to the factory reset values go to: Menu->Setup -> Factory Reset-> press Enter to
confirm
Fallback IP Address:
Fallback Subnet mask:
Fallback gateway:
Default username:
Default password:
Full Factory Reset
P3K
Embedded webpages
EXT3-21-XR-TR – Technical Specifications
192.168.1.39
255.255.255.0
192.168.0.1
Admin
Admin
"#FACTORY" command.
"FACTORY OK"
After receiving
and complete the procedure
• Power cycle
• Send command
"#RESET"
Go to: Device>General and click FACTORY RESET
115,200
8
1
None
ASCII
#ROUTE1,1,2<CR>
perform one of the following to restart the device
:
Kramer Electronics Ltd.
64