Kramer EXT3-C-XR-TR User Manual page 55

4. If needed, select modulation method by pressing M on Rx IR 1 cell (see
5. Click SAVE.
If using Internal Gateway, configure specific IR command via Action Editor Menu
IR signals routing is set.
Setting Audio Output Volume Level
To set the audio output volume level, (see
on page 27).
EXT3-21-XR-TR – Using Embedded Web Pages
Figure 44: IR Tab Signals Routing
Figure 45: IR Modulation Method Setting
Setting Analog Audio Output Volume Level
Kramer Electronics Ltd.
(Figure 45).
53