Kramer EXT3-C-XR-TR User Manual page 39

Auto-disconnecting a USB Device on Inactive Host
When a host becomes inactive, you can automatically disconnect one or multiple USB
devices.
To define auto-disconnection:
1. Go to the Device > General page
2. Select the USB tab.
3. For each USB Device Port, set the auto disconnection status to On or Off. You can also
Select All Off or All On to set all device ports to off or on, respectively.
4. Click SAVE.
USB devices are set.
EXT3-21-XR-TR – Using Embedded Web Pages
(Figure
Figure 28: USB Page – USB Device Auto-Disconnection
23).
Kramer Electronics Ltd.
37