Table of Contents
Advertisement
Upgrading Firmware
Use the Kramer K-UPLOAD software to upgrade the firmware via ethernet or the RS-232
port, allowing RS-232 to control/program the device). The device continues to operate and
once FW upload complete, you are asked to Restart no or later.
The latest version of K-UPLOAD and installation instructions can be downloaded from our
website at: www.kramerav.com/support/product_downloads.asp.
Note that in order to use the micro USB port, you need to install the Kramer USB driver,
available at: www.kramerav.com/support/product_downloads.asp.
EXT3-21-XR-TR – Upgrading Firmware
Kramer Electronics Ltd.
61
Advertisement
Table of Contents
Need help?
Do you have a question about the EXT3-C-XR-TR and is the answer not in the manual?