Channel Merging - UNI-T UTG9504T User Manual

UTG9000T Series Function Abitrary Waveform Generator
always maintain the specified ratio/deviation of the reference channel.
Ratio: the specific value of CH2： CH1; Deviation: the difference value of CH2-CH1. The amplitude settings of CH3
coupling to CH4 is the same as CH1 coupling to CH2.
Tap Ampl to step through OFF/ON.
Tap Type to step through Ratio/Deviation.
Ratio type: tap CH2:CH1 tab, pop-out the virtual numeric keyboard to enter numbers and tap return key.
Deviation type: tap CH2:CH1 tab, pop-out the virtual numeric keyboard to enter numbers and tap return key.
3. Phase Coupling
The phase coupling mode to set ratio or deviation. CH1 and CH2 are each other's reference sources, change one
of the channel's (as the reference source) phase, the other channel will adjustment automatically. And always
maintain the specified ratio/deviation of the reference channel.
Ratio: the specific value of CH2：CH1; Deviation: the difference value of CH2-CH1. The phase settings of CH3
coupling to CH4 is the same as CH1 coupling to CH2.
Tap Phase to step through OFF/ON.
Tap Type to step through Ratio/Deviation.
Ratio type: tap CH2:CH1 tab, pop-out the virtual numeric keyboard to enter numbers and tap return key.
Deviation type: tap CH2:CH1 tab, pop-out the virtual numeric keyboard to enter numbers and tap return key.
4. Display Icon
Turn on channel coupling, the coupling icon appears on the right side of the waveform parameters display list in
the home page.

2.4.3 Channel Merging

Tap Utility➡Coupling to make the relevant settings:
In general, the output terminal of CH1/2 is only export the CH1/2 waveform, turn on channel merging function can
output the CH1 and CH2 waveform; the performance of CH3/4 is same as the output terminal of CH1/2.
Tap CH1 Merge to step through OFF/CH1+CH2. CH1+CH2 merging interface see Figure 2-16.
Figure 2-15 Channel Coupling
27