Table of Contents
Advertisement
UTG9000T Series Function Abitrary Waveform Generator
independent, it can set the same or different modulation modes to each channel.
Select PWM modulation
Tap CH1→Modulate→PWM to turn on PWM modulation, the instrument output the moduluated waveform according
to the current setting of the modulation wave and the carrier wave.
Select the carrier waveform
PWM carrier waveform can only be pulse wave. After select PWM modulation, tap Base to present the carrier waveform
on the right side.
Carrier wave frequency settings
Refer to The carrier wave frequency settings of AM modulation.
99
Advertisement
Table of Contents
