Table of Contents
Advertisement
4）Set the modulation depth
After the parameter setting of the carrier wave, tap Type to return to AM modulation interface to set the depth.
Tap ModDepth tab to pop-out visual numeric keyboard to enter 80%.
5）Turn on the output channel
Tap channel Out to ON or push CH1 on the front panel to quick set the output channel,and it can aslo turn on at
the Utility interface,tap Utility→Channel→Output or double-click the channel tab at the bottom of the screen to
step through ON/OFF. CH1 and CH1 tab backlight light on indicating that the channel 1 output is turned on.
UTG9000T Series Function Abitrary Waveform Generator
38
Advertisement
Table of Contents
