UNI-T UTG9504T User Manual page 34

Select AM Modulation
Tap CH1→Modulate→AM to turn on the AM modualtion, the instrument output the moduluated waveform according to the
current setting of the modulation wave and the carrier wave.
Select the carrier waveform
The carrier wave of AM: sine, square, ramp, pulse and arbitrary wave (except DC), the default option is sine wave. After
select AM modulation, tap Base to present the carrier waveform on the right side.
Carrier frequency settings
The frequency range of the carrier wave can set differently, all the default fundamental frequency is 1kHz, see Table
4-1 and Table 4-2 for the frequency settings of the different carrier waveform.
Carrier waveform
Sine wave
Table 4-1 The carrier wave frequency of CH1 and CH2
UTG9604T
MIN MAX
1μHz 600MHz
UTG9000T Series Function Abitrary Waveform Generator
Frequency
UTG9504T
MIN MAX
1μHz 500MHz
34
UTG9354T
MIN MAX
1μHz 350MHz