Set Utility; Set Channel - UNI-T UTG2122B User Manual

2.5 Set utility

You can set channel information, sync output, merge channel, set up channel coupling, frequency meter,
network, system, language, clock, load, save setting, arbitrary wave management, software upgrade,
help, system information in Utility.

2.5.1 Set channel

Menu Sub menu
Channel output
Channel reverse
Sync output
Load
Channel merge
CH1 setting/ CH2
setting Channel duplicate
Amplitude limit
Amplitude upper
limit
Amplitude lower
limit
Select Utility CH1 setting (or CH2 setting), to set the channel ：
Note: Since there are numerous items under CH1 setting, there are 2 pages in this menu. You need to
press CH1 setting again to skip to next page. CH2 setting is the same.
UTG2000B Series
Setting Note
ON/OFF
ON/OFF
CH1/CH2/OFF
50Ω, high 1Ω to 1kΩ
resistance
ON/OFF When this function is ON, channel 1
merges with channel 2.
Channel can be duplicated each other in
settings status.
ON/OFF
Set the upper limit of amplitude output
Set the lower limit of amplitude output
19