Table of Contents
Advertisement
UTG9000T Series Function Abitrary Waveform Generator
Comperhensive example
In FSK modulation mode, set an internal 2kHz,1Vpp sine wave as a carrier wave, set the hopping frequency to
800Hz, make the carrier wave and hopping frequence shift between within 200Hz frequency. The settings steps as
following,
Turn on FSK modulation mode: tap CH1→Modulate→FSK accordingly.
1)
2)
Set the parameter of the carrier wave signal
Tap Base to select sine as the carrier wave (the default option is sine), so this step has no change.
Tap Freq to pop-out visual keyboard to enter 2kHz.
Tap Ampl to pop-out visual keyboard to enter 1Vpp.
3)
Set the hopping frequency and the modulating frequency
After the parameter setting of the carrier wave, tap Type to return to modulation interface to set the modulating
frequency.
57
Advertisement
Table of Contents
