Table of Contents
Advertisement
UTG9000T Series Function Abitrary Waveform Generator
Select SPI mode
Tap Utility → Digital → SPI accordingly, turn on SPI mode to output the current SPI protocol signal.
Clock setting
The sending clock of SPI can set by user's need. In SPI mode, tap Clock to pop-out visual numeric keyboard to
enter values and select unit. The clock range can set to 1Hz~50MHz.
Data format setting
The data format of SPI can set by user's need. It have two format types: hexadecimal and character.In SPI mode, tap Format
to step through HEX and Char.
Set data
Tap blank input box on the right side to pop-out visual numeric keyboard to enter bits and tap return key to complete an
entry.
128
Advertisement
Table of Contents
