Table of Contents
Advertisement
Comprehensive example
In DSB-AM modulation mode, set an internal 1kHz sqaure wave as a modulating signal, another sine wave signal with
frequency 2kHz, amplitude2Vpp as the carrier wave signal, the settings steps as following,
1）Turn on AM modulation mode: tap CH1→Modulate→AM accordingly.
1)
Set the parameter of the carrier wave signal
Tap Base to select Square as the carrier waveform (the default option is sine wave).
Tap Freq tab to pop-out visual numeric keyboard to enter 2kHz.
Tap Ampl tab to pop-out visual numeric keyboard to enter 2Vpp.
3）Set the modulation wave and frequency
After the parameter setting of the carrier wave, tap Type to return to DSB-AM modulation interface to set the
modulation wave nd frequency.
UTG9000T Series Function Abitrary Waveform Generator
92
Advertisement
Table of Contents
