UNI-T UTG9504T User Manual page 70

Tap Freq to pop-out visual keyboard to enter 2kHz.
Tap Ampl to pop-out visual keyboard to enter 2Vpp.
3) Set the modulating frequency and phase
After the parameter setting of the carrier wave, tap Type to return to modulation interface to set the modulating
frequency and phase.
Tap ModFreq to pop-out visual keyboard to enter 1kHz.
Tap Phase to pop-out visual keyboard to enter 180°.
4） Turn on the output channel
Tap channel Out botton to ON or push CH1 key on the front panel to quick set the output channel,and it can aslo
turn on at the Utility interface,tap Utility→Channel→Output or double-click the channel tab at the bottom of the
screen to step through ON/OFF. CH1 key and CH1 tab backlight light on indicating that the channel 1 output is
turned on.
UTG9000T Series Function Abitrary Waveform Generator
70