Table of Contents
Advertisement
Tap Freq to pop-out visual keyboard to enter 2kHz.
Tap Ampl to pop-out visual keyboard to enter 2Vpp.
3)
Set the BPSK bitrate and phase
After the parameter setting of the carrier wave, tap Type to return to modulation interface to set the BPSK rate
and phase.
Tape Bitrate to pop-out visual numeric keyboard to enter 1kbps.
Phase use the default value,phase1: 0°,phase2 ：90°.
Tape PN Code PN3 to select PN15.
UTG9000T Series Function Abitrary Waveform Generator
74
Advertisement
Table of Contents
