UNI-T UTG9504T User Manual page 76

Function/ arbitrary waveform generator

Table of Contents

UTG9000T Series Function Abitrary Waveform Generator

(carrier phase and three modulating phase) According to the logical level of the modulating signal to output the

carrier phase or modulating phase. The modulation modes for each channel are independent, it can set the same or

different modulation modes to each channel.

Select QPSK modulation

Tap CH1→Modulate→QPSK to turn on FSK modulation, the instrument output the moduluated waveform according to the

current setting of the modulation wave and the carrier wave.

Select the carrier waveform

The carrier wave of QPSK: sine, square, ramp and arbitrarty wave (except DC), the default option is sine wave. After

select QPSK modulation, tap Base to present the carrier waveform on the right side.

Carrier wave frequency settings

Refer to The carrier wave frequency settings of AM modulation.

Table of Contents

Utg9000t series