Table of Contents
Advertisement
2）Set the parameter of modulating signal
Base on the step 1) to tap ModFreq tab to pop-out visual numeric keyboard to enter 200Hz.
3）Set the parameter of the carrier wave signal
Tap Base to select sine as the carrier wave (the default option is sine), so this step has no change.
Tap Freq to pop-out visual keyboard to enter 900Hz.
4）Set the phase deviation
After the parameter setting of the carrier wave, tap Type to return to modulation interface to set the phase
deviation.
UTG9000T Series Function Abitrary Waveform Generator
48
Advertisement
Table of Contents
