Table of Contents
Advertisement
2)
Set data parameter
Tap Clock to pop-out visual numeric keyboard to enter 15kHz.
Tap Interval to pop-out visual numeric keyboard to enter 5ms.
Tap blank input box to enter13, 21, 34, 55, 89.
3)
Turn on output function
Tap OFF to turn on the output function, CH2 is SPI-SCLK, CH3 is SPI-CS, CH4 is SPI-MOSI. See the figure as
below.
3.5.2 IIC Protocol
The waveform generator can create configurable protocol signal parameters in IIC protocol mode.
UTG9000T Series Function Abitrary Waveform Generator
130
Advertisement
Table of Contents
