Table of Contents
Advertisement
UTG9000T Series Function Abitrary Waveform Generator
Set send type
Please refer to section 3.5.1
Set send type
Set interval time
If the send mode is auto, set the interval time of data send according to the actual condition. Tap Interval to pop-out visual
numeric keyboard to enter values and select unit. The interval time range can set to 20ns~1000s.
Comprehensive example
In IIC mode, set the output address to 10 bit, values is 65, clock 500kHz, select decimalism 17, 19, 29, 29, 31 as the
data format, interval time 5ms, the setting steps as following,
1)
Turn on IIC mode
Tap Utility → Digital → IIC accordingly.
132
Advertisement
Table of Contents
