Table of Contents
Advertisement
UTG9000T Series Function Abitrary Waveform Generator
Format to step through HEX and Char.
Set data
Tap blank input box on the right side to pop-out visual numeric keyboard to enter bits and tap return key to complete an
entry.
Set send type
Please refer to section 3.5.1
Set send type
Select baud rate
The default baud rate is 115200. Tap Baudrate to pop-out visual numeric keyboard to enter values.
Set bit
It can set different bit in UART mode, data have 4, 5, 6, 7, 8 bits. The default bit is 8. Tap Baudrate to pop-out visual
numeric keyboard to enter values.
Set stop bit
It can set different stop bit in UART mode. Tap Stop to step through 1bit and 2bit. The default is 1bit.
134
Advertisement
Table of Contents
