UNI-T UTG9504T User Manual page 116

UTG9000T Series Function Abitrary Waveform Generator
2) Select burst waveform
Tap Base o select sine wave as the carrier waveform (the default option is sine), so this step has no change.
Note: If the setting interface display Freq, this means it can only change the frequency parameter, it can't switch
to period. 2ms period is corresponding to 500Hz and their recripocal relationship is T=1/f. Tap Freq to step
through frequency and period.
Tap Period to pop-out visual numeric keyboard to enter 5ms.
Tap Ampl to pop-out visual numeric keyboard to enter500mVpp.
116