UNI-T UTG9504T User Manual page 58

Tap ModFreq to pop-out visual keyboard to enter 200Hz.
Tap HopFreq1 to pop-out visual keyboard to enter 800Hz.
4) Turn on the output channel
Tap channel Out botton to ON or push CH1 key on the front panel to quick set the output channel,and it can aslo
turn on at the Utility interface,tap Utility→Channel→Output or double-click the channel tab at the bottom of the
screen to step through ON/OFF. CH1 key and CH1 tab backlight light on indicating that the channel 1 output is
turned on.
The shape of the FSK modulation waveform viewed through an oscilloscope is shown in the figure below,
UTG9000T Series Function Abitrary Waveform Generator
58