Table of Contents
Advertisement
UTG9000T Series Function Abitrary Waveform Generator
3)
Set burst period and cycle
After select burst waveform, tap Type to turn back to burst interface.
Tap parameter bar to enter value and select unit.
4) Turn on the output channel
Tap channel Out botton to ON or push CH1 key on the front panel to quick set the output channel,and it can
aslo turn on at the Utility interface,tap Utility→Channel→Output or double-click the channel tab bar at the
bottom of the screen to step through ON/OFF. CH1 key and CH1 tab bar backlight light on indicating that the
channel 1 output is turned on.
117
Advertisement
Table of Contents
