Table of Contents
Advertisement
Tap Utility→System to enter the settings interface (on the right side)
1.
DHCP
Tap DHCP to step through OFF/ON.
2.
IP Address
IP address format: nnn.nnn.nnn.nnn, the first of nnn range can set to 1~233, the second 0~255. It is suggest that
you inquiry the internet administrator to get an available IP address. Tap IP or push the numeric keyboard to enter
numbers. This settings will be stored in non-volatile memory, and the instrument will automatically apllied on next
boot.
3.
Mask
Subnet mask format: nnn.nnn.nnn.nnn, nnn range can set to 0~255. It is suggest that you inquiry the internet
administrator to get an available subnet mask address. Tap Mask or push the numeric keyboard to enter numbers.
This settings will be stored in non-volatile memory, and the instrument will automatically apllied on next boot.
4.
Gateway
Gateway format:nnn.nnn.nnn.nnn，It is suggest that you inquiry the internet administrator to get an available
gateway. Tap Gateway or push the numeric keyboard to enter numbers. This settings will be stored in non-volatile
memory, and the instrument will automatically apllied on next boot.
5.
MAC
MAC address are numbered from zero and incremented sequentially by one, so the MAC address space of
memory increase linearly.It is represented as a binary number, an unsigned integer, and written as a hexadecimal
number.
UTG9000T Series Function Abitrary Waveform Generator
32
Advertisement
Table of Contents
