UNI-T UTG9504T User Manual page 30

Tap Utility→System to make the relevant settings
1. Language
Tap Language to step through Chinese/English, this function requires to restart the instrument.
1. Separator
Tap to Separator to step through Comma, Space, None, and it is separator between in parameters of channel.
2. Beep
Tap Beep to step through OFF/ON to set the sound when tap the key.
3. Backlight
Tap Backlight key to step through the light of screen of"30%, 40%, 50%, 60%, 70%, 80%, 90%, 100%".
4. Screen Saver
Tap Screen Saver to step through OFF/5min, 15min, 30min, and 60min. The instrument will turn off screen display
as the screen saver setting, it can be call on by press any keys.
5. Clock Source
Tap Clock Source key to step through Internal/External.
Internal: supported clock source of 10MHz.
External: receive the external clock through the terminal of 10MHz In at the back panel (frequency 10MHz,
amplitude TTL).If the instrument inspect the terminal has no effect external clock, screen will pop-out a notice
" External clock is invalid."And display the symbol
Beep OFF/ON
Backlight 30%、 40%、 50%、 60%、 70%、
80%、90%、100%
Screen OFF,5min,15 min,30 min,60
Saver min
Clock Internal,External
Source
Clock OFF/ON
Output
Power On Default, Last, Set1, Se2,
Set3, Set4, Set5
Phase Sync, Independent
Manual
Save
Default
UTG9000T Series Function Abitrary Waveform Generator
on the top right. If the instrument inspect the terminal of
30
Save as a default
staute
Restore to factory
settings or save the
settings
Save the preview
settings
Restore default
settings