Channel Coupling - UNI-T UTG9504T User Manual

UTG9000T Series Function Abitrary Waveform Generator
Tap Utility➡Channel to make the relevant settings:
1. Output
Tap Output to step through ON/OFF. Note: CH1、CH2、CH3、CH4 key can quick turn on /off the chanel output
function on the front panel.
2. Inverse
Tap INV to step through ON/OFF.
3. Load
Tap Load to step select HighZ, 50Ω or to enter number within 1Ω~1000kΩ.
4. Amplitude Limit
This function is order to protect load. Tap Ampl Limit to step through ON/OFF.
5. High
Tap High to enter the high limit of amplitude.
6. Low
Tap Low to enter the high limit of amplitude.
7. Sync Output
Tap Sync Out to step through ON/OFF. The sync output of CH1 is the CH3, and the CH2 sync output is
corresponding to CH4. When CH1 sync output is turn on, CH3 tab becomes
turn on, CH4 tab becomes
8. Sync Inverse
Tap Sync-INV to step through ON/OFF.

2.4.2 Channel Coupling

The channel coupling is classified as Frequency Coupling, Amplitude Coupling and Phase Coupling. The menu
settings as following,
Menu
Frequency
Coupling
High
Low
Table 2-3 Frequency Coupling
Sub-menu Settings
Frequency OFF/ON
Type Ratio,Deviation
The high limit of the output
amplitude
The low limit of the output
amplitude
Description
25
; When CH2 sync output is