UNI-T UTG9504T User Manual page 93

UTG9000T Series Function Abitrary Waveform Generator
Tap ModWave tab to pop-out visual numeric keyboard to select square wave.
Tap ModFreq tab to pop-out visual numeric keyboard to enter 1kHz.
4）Turn on the output channel
Tap channel Out to ON or push CH1 on the front panel to quick set the output channel,and it can aslo turn on at
the Utility interface,tap Utility→Channel→Output or double-click the channel tab at the bottom of the screen to
step through ON/OFF. CH1 and CH1 tab backlight light on indicating that the channel 1 output is turned on.
The shape of the AM modulation waveform viewed through an oscilloscope is shown in the figure below,
93