Dsb-Am (Double Side Band Amplitude Modulation) - UNI-T UTG9504T User Manual

UTG9000T Series Function Abitrary Waveform Generator
4) Turn on the output channel
Tap channel Out to ON or push CH1 on the front panel to quick set the output channel,and it can aslo turn
on at the Utility interface,tap Utility→Channel→Output or double-click the channel tab at the bottom of the
screen to step through ON/OFF. CH1 and CH1 tab backlight light on indicating that the channel 1 output is
turned on.
The shape of the AM modulation waveform viewed through an oscilloscope is shown in the figure below,

3.1.13 DSB-AM (Double Side Band Amplitude Modulation)

89