Note: 1、Differen frequency and amplitude will effect the range of SNR. The default noise superposition is 10dB.
2、When the noise superposition is turned on, the amplitude coupling function is not available.
Secondary Function Settings
2.4
Utility can set the settings of the channel, channel coupling, frequency counter, digital protocol, system and internet,
detailed description as following,
2.4.1 Channel Settings
Menu
CH1/2
Menu
CH3/4
Figure 2-14 Noise Superposition Settings
Sub-menu
Setting
Output
ON/OFF
Inverse
ON/OFF
Load
50Ω, high resistence 1Ω~1000kΩ
Amplitude Limit
ON/OFF
High
Output
Inverse
ON/OFF
Load
ON/OFF
Sub-menu
Output
Inverse
Load
Amplitude Limit
UTG9000T Series Function Abitrary Waveform Generator
Table 2-1 CH1/2
Description
The high limit of the output
amplitude
The low limit of the output
amplitude
Table 2-2 CH3/4
Setting
Description
OFF/ON
OFF/ON
High resistance
1Ω~1000kΩ
(default)
OFF/ON
24