UNI-T UTG9504T User Manual page 26

Meue
Amplitude
Coupling
Meue
Phase Coupling
Note: 1、The coupling setting of CH3 to CH4 is the same as CH1 coupling to CH2.
2、Channel Merge is not available when Amplitude Coupling is on.
Tap Utility➡Coupling to make the relevant settings:
1. Frequency Coupling
The frequency coupling mode to set ratio or deviation. CH1 and CH2 are each other's reference sources, change
one of the channel's (as the reference source) frequency counter, the other channel will adjustment automatically.
And always maintain the specified ratio/deviation of the reference channel.
Ratio: the specific value of CH2：CH1; Deviation: the difference value of CH2-CH1. The frequency settings to set
CH3 coupling to CH4 is the same as CH1 coupling to CH2.
Tap Freq to step through OFF/ON.
Tap Type to step through Ratio/Deviation.
Ratio type: tap CH2:CH1 tab, pop-out the virtual numeric keyboard to enter numbers and tap return key.
Deviation type: tap CH2:CH1 tab, pop-out the virtual numeric keyboard to enter numbers and tap return key.
2. Amplitude Coupling
The amplitude coupling mode to set ratio or deviation. CH1 and CH2 are each other's reference sources, change
one of the channel's (as the reference source) amplitude, the other channel will adjustment automatically. And
Ratio CH2:CH1
or CH4:CH3
Deviation CH2-CH1
or CH4-CH3
Table 2-4 Amplitude Coupling
Sub-menu Setting
Amplitude OFF/ON
Type Ratio,Deviation
Ratio CH2:CH1
or CH4:CH3
Deviation CH2-CH1
or CH4-CH3
Table 2-5 Phase Coupling
Sub-menu Setting
Phase OFF/ON
Type Ratio,Deviation
Ratio CH2:CH1
or CH4:CH3
Deviation CH2-CH1
or CH4-CH3
UTG9000T Series Function Abitrary Waveform Generator
Turn on Ratio to make the
setting
Turn on Deviation to make the
setting
Description
Turn on Ratio to make the
setting
Turn on Deviation to make the
setting
Description
Turn on Ratio to make the
setting
Turn on Deviation to make the
setting
26