UNI-T UTG9504T User Manual page 72

UTG9000T Series Function Abitrary Waveform Generator
Select the carrier waveform
The carrier wave of BPSK: sine, square, ramp, pulse and arbitrarty wave (except DC), the default option is sine wave.
After select BPSK modulation, tap Base to present the carrier waveform on the right side.
Carrier wave frequency settings
Refer to The carrier wave frequency settings of AM modulation.
The PN code settings
UTG9000T function/arbitrary waveform generator can select the internal source. Turn on BPSK modulation mode,
the default PN code is PN3. Rotate multifunction knob or tap PN Code→PN3 to select different PN code.
BPSK rate settings
In BPSK modulation mode, it can set the shift frequency between in the carrier phase and the modulating phase. The
72