UTG9000T Series Function Abitrary Waveform Generator
3.4.2 Point by point output/ DDS mode
UTG9000T supports point by point and DDS mode. In point by point mode, the waveform generator automatically calculates
frequency of output signal ( 4577.64Hz)according to waveform length (e.g. 65.536k points) and sampling rate. The waveform
generator outputs waveform points one by one with this frequency. It can prevent loss of important waveform point. In DDS
default mode, the waveform generator output arbitrary waveform by automatic interpolation or select point as fixed length
(8.192 points) and the frequency of parameter list. Rotate multifunction knob or tap Mode tab to step through DDS and
Points. Point by point interface figure as below.
3.4.3 Select Abitrary Waveform
UTG9000T can select arbitrary waveform from internal or external memory storage. Rotate multifunction knob, push
direction key or tap WaveFile to enter select it. See the figure as below,
119