Removal Of The Rear Suspension Rocker Arm - Ducati 1098 2007 Manual

section
G 7

Removal of the rear suspension rocker arm

A
Disconnect the top of the rear shock absorber from the rocker arm as described in "Removal of the rear shock absorber" in this
section.
Separate the tie-rod (14) and the rocker arm (8) by unscrewing the bolt (4) and recover the collars (11) from either side of the ball
joint (13).
B
C
D
Before removing the rocker arm (8) from the frame, check the play of its internal needle roller bearings (7).
E
F
Grasp the rear end of the rocker arm and try to move it in all four directions.
G
If excessive play is encountered, the bearings need to be renewed.
To remove the rocker arm (8) from the frame, unscrew the nut (3) and withdraw the washer (2).
H
L
Slide out the bolt (1) and remove the rocker arm assembly (8) from the frame.
M
N
P
56
Wheels - Suspensions - Brakes
8
4
14
7
8
WWW.PlanDeGraissage.ORG
11
13
8
7
3
2
8
1
1098/1098S - M.Y. 2007 - edition 00