Clutch Cable Inspection And Adjustment; Clutch Cable Removal And Installation - Suzuki RMX450Z Service Manual

Clutch Cable Inspection and Adjustment

Refer to "Clutch Lever Clearance Inspection and
Adjustment" in Section 0B (Page 0B-11).

Clutch Cable Removal and Installation

Removal
1) Remove the fuel tank. Refer to "Fuel Tank Removal
and Installation" in Section 1G (Page 1G-5).
2) Loosen the cable adjuster lock-nut (1) and adjuster
(2).
1
3) Turn the adjuster (3) to align the slits of adjuster and
of the lever holder straight.
4) Disconnect the clutch cable (4) from the lever.
3
BA02J25306002
BA02J25306003
2
IA02J1530002-01
4
IA02J1530007-01
5) Remove the clamps.
6) Loosen the nut (4) and disconnect the clutch cable
(5) from the clutch release camshaft.
Installation
Install the clutch cable in the reverse order of removal.
Pay attention to the following points:
• Route the clutch cable properly. Refer to "Throttle
Cable Routing Diagram" in Section 1D (Page 1D-2).
• After install the removed parts, adjust the clutch cable
play. Refer to "Clutch Lever Clearance Inspection and
Adjustment" in Section 0B (Page 0B-11).
Clutch: 5C-2
IA02J1530008-01
5
4
IA02J1530034-03