Clutch Cable - Suzuki VZR1800K6 Service Manual

RIGHT
,
OUTSIDE

CLUTCH CABLE

Pass the clutch cable through the lever cover.
A: Clutch cable
B: Clutch lever cover
Turn the clutch cable adjuster and lock nut in as far as
possible and align the slots.
Insert the inner cable end into the recess in the clutch
lever, then pull on the outer cable housing and insert it
into the adjuster.
Do not adjust at this time.
Adjustment will be covered in the SERVICING section.
NOTE:
Before installing the cable, grease the cable
end.
Install the lever cover.
A: Clutch cable
B: Adjuster
C: Lock nut
D: Cable end
E: Clutch lever cover
CLAMP
Clamp the right handlebar switch wiring harness, front
brake hose union or front brake hoses with straps.
NOTE:
Cut the remaining of the strap as shown in the
photograph.
A: Strap L:140 mm
B: Right switch wiring harness
C: Front brake hose union
D: Front brake hose
9