Suzuki RMX450Z Service Manual page 304

2B-5 Front Suspension:
9) Compress the outer tube by hands and install the
special tool between the axle holder bottom (2) and
lock-nut (4).
Special tool
(B): 09910–20115 (Piston holder)
(B)
10) Hold the lock-nut and remove the center bolt (3).
11) Remove the push rod (5).
12) With the outer tube compressed by hands, remove
the special tool.
CAUTION
!
Do not remove the lock-nut (4). If removed,
the inner rod may slip into the damper rod,
possibly causing the threaded section to
damage the oil seal.
4
2
IA02J1220013-01
3
IA02J1220014-01
5
IA02J1220015-01
13) Loosen the fork cap bolt (sub-tank) (6) and remove
the sub-tank (6) along with the damper and
assembly (7).
14) Remove the fork spring (8).
CAUTION
!
Do not attempt disassemble the damper rod
assembly. The damper rod assembly is
available only as an assembly.
8
15) Remove the dust seal (9).
16) Remove the stopper ring (10).
CAUTION
!
• Scratches on the inner tube could cause
oil leaks.
• Avoid scratching when removing.
9
4
IA02J1220065-01
7
6
IA02J1220017-01
10
IA02J1220018-01