Handlebars Removal And Installation - Suzuki RMX450Z Service Manual

6B-3 Steering / Handlebar:

Handlebars Removal and Installation

Removal
1) Remove the handlebar pad (1).
2) Disconnect the clamp.
3) Remove the engine stop switch (2), clutch lever
holder (3) and left grip (4).
NOTE
Mark the paint marks to the matching
surfaces of clutch lever holder and
handlebars, left handlebar grip and
handlebars.
4
BA02J26206003
1
IA02J1620002-01
3
2
IA02J1620003-02
IA02J1620004-01
4) Disconnect the clamps.
5) Remove the starter button (5) and front brake master
cylinder (6).
CAUTION
!
Do not turn the front brake master cylinder
upside down.
NOTE
Mark the paint mark to the matching surface
of master cylinder holder and handlebars
before removing.
6
6) Remove the throttle case (7).
NOTE
Mark the paint mark to the matching surface
of throttle holder and handlebars before
removing.
5
IA02J1620037-01
IA02J1620005-01
7
IA02J1620007-01