Suzuki RMX450Z Service Manual page 347

4) Loosen two axle holder bolts (3) on the right front
fork leg.
5) Draw out the front axle and remove the front wheel.
NOTE
After removing the front wheel, fit the
calipers temporarily to the original positions.
6) Remove the speed sensor (4) (RH only).
7) Remove the collar (5) (LH only).
5
3
IA02J1240022-01
4
IA02J1240023-03
IA02J1240030-03
Installation
1) Install the collar (1) to the left side of the wheel.
1
2) Apply grease to the lip of dust seal.
: Grease 99000–25010 (SUZUKI SUPER
GREASE "A" or equivalent)
3) Install the speed sensor (2) to the front wheel.
2
4) Install the front wheel.
NOTE
Fit the new projection "A" of the speed
sensor with the part "B" of right front fork
leg.
"B"
Wheels and Tires: 2D-4
IA02J1240031-01
IA02J1240024-02
"A"
IA02J1240025-02