Hot Starter Lever Construction
1. Hot starter lever
Throttle Body Inspection
Refer to "Throttle Body Inspection" in Section 0B
(Page 0B-13).
Engine Idle Speed Inspection and Adjustment
Inspect and adjust the engine idle speed in the following
procedures:
1) Warm up the engine.
2) Connect the tachometer to the high-tension cord.
Special tool
(A): 09900–26006 (Engine tachometer)
(A)
1
2. Hot starter lever cover
: Fit the cover to the lever positively.
3) Set the engine idle speed sensor between 1 900 and
BA02J21406011
2 100 r/min by turning the idle air screw (1).
Engine idle speed
2 000 ± 100 r/min
BA02J21406012
IA02J1140261-01
Engine Mechanical:
2
1
1D-14
BA02J21406010
IA02J1140253-03
IA02J1140262-01