Engine Stop Switch Removal And Installation; Ignition Switch Inspection; Ignition Switch Removal And Installation - Suzuki RMX450Z Service Manual

1H-9 Ignition System:

Engine Stop Switch Removal and Installation

Removal
1) Turn off the ignition switch.
2) Remove the fuel tank. Refer to "Fuel Tank Removal
and Installation" in Section 1G (Page 1G-5).
3) Disconnect the engine stop switch lead wire coupler
(1).
4) Remove the clamps (2) and (3).
5) Remove the engine stop switch (4).
2
4
Installation
Installation is in the reverse order of removal.
BA02J21806008
1
IA02J1180012-01
3
IA02J1180013-01

Ignition Switch Inspection

Refer to "Speedometer Construction" in Section 9C
(Page 9C-2).

Ignition Switch Removal and Installation

Removal
1) Remove the headlight cover. Refer to "Headlight
Removal and Installation" in Section 9B (Page 9B-2).
2) Disconnect the ignition switch lead wire coupler (1)
and remove the ignition switch (2).
2
Installation
Installation is in the reverse order of removal.
BA02J21806009
BA02J21806010
1
IA02J1180014-04