Table of Contents
Advertisement
3.5.1. Configuring the Generator Source ID Modes – Model 8010-SIE
GEN SRC ID MODE
Id mode time sid
Id mode rdr sid
Id mode rdr lvs
Id mode vtr sid
3.5.2. Configuring the Generator Source ID Modes – Model 8010-SIE-GPSII
GEN SRC ID MODE
Id mode time sid
Id mode rdr sid
Id mode gps sid
OPERATION
Model 8010-SIE Digital Source ID Encoder Manual
The GEN SRC ID MODE menu item is used to choose a method of
encoding the source ID information. The 8010-SIE operates in one of
four modes. In all modes, the source ID name is programmed from the
front panel of the 8010-SIE and encoded into the user bits.
The encoded source ID information consists of a nine alphanumeric
character message and optional VTR status and LVS info and is
multiplexed into the user bits of three consecutive frames.
In TIME SID mode the user enters the time from the front panel and
encodes 9 character source ID into the user bits.
In RDR SID mode, the 8010-SIE takes time from its LTC or VITC
reader and encodes 9 character source ID into the user bits.
In RDR LVS mode, the 8010-SIE is designed to interface to a Profile
Disk recorder running the LVS software. The serial port of the LVS
device sends recorder status, scene and control information to the
8010-SIE. In this mode the 8010-SIE takes time from its LTC or VITC
reader and encodes the source ID and LVS info into the user bits.
In VTR SID mode, it is designed to listen to communications between a
VTR and its controller to get time code and machine status.
The GEN SRC ID MODE menu item is used to choose a method of
encoding the source ID information. The 8010-SIE-GPSII operates in
one of three modes. In all modes, the source ID name is programmed
from the front panel of the 8010-SIE and encoded into the user bits.
The encoded source ID information consists of a nine alphanumeric
character message and is multiplexed into the user bits of three
consecutive frames.
In TIME SID mode the user enters the time from the front panel and
encodes 9 character source ID into the user bits.
In RDR SID mode, the 8010-SIE takes time from its LTC or VITC
reader and encodes 9 character source ID into the user bits.
In GPS SID mode, the 8010-SIE takes time from the GPS antenna and
encodes 9 character source ID into the user bits.
Revision 2.2
Page 3-8
Advertisement
Table of Contents
