evertz 8010-SIE Instruction Manual page 81

For example:
------------------------------------------
8045 Flash ROM Programming Utility Ver 1.3
COPYRIGHT 2000 EVERTZ MICROSYSTEMS LTD.
------------------------------------------
Code Bank: 0 1 2 3 4 5 6 7
BLANK? N N N N N N N N
Flash ROM is valid
-- MENU --------------------------------
<X>Modem download HEX file to Flash
<A>SCII download HEX file to Flash
production <T>est
<Q>uit Programmer (Jump into Flash)
----------------------------------------
COMMAND:
6. The following is a list of possible reasons for failed communications:
•
Defective Serial cable.
•
Wrong communications port selected in the terminal program.
•
Improper port settings in the terminal program. (Refer to step 3 for settings).
•
Arrow key ( ) not being pressed correctly during power-up.
7. Press 'X' to initiate X-modem file transfer.
8. The boot code will prompt you to confirm that you want to erase the Flash ROM memory. Press 'Y'
to proceed, 'N' to cancel.
The Flash ROM must be erased first.
9. The boot code will indicate when the Flash memory is erased
Flash ROM is now BLANK. You may proceed.
10. Upload the "*.HEX" file supplied using the X-Modem transfer protocol of your terminal program. If
you do not start the upload within a short time the firmware loading operation will time out. You can
restart the process by selecting 'X' from the menu again.
11. The boot code will indicate whether the operation was successful upon completion of the upload.
Download Complete!
12. The following is a list of possible reasons for a failed file transfer:
•
The supplied "*.HEX" file is corrupt.
•
Wrong file specified to be uploaded.
•
The PCs' RS-232 communications port can't handle a port speed of 19200 baud.
13. To complete the upgrade, either select "Q" (Quit) from the terminal menu, or power-down the unit
and reapply power without pressing any keys to resume normal operation. If the Flash ROM
TECHNICAL DESCRIPTION
Model 8010-SIE Digital Source ID Encoder Manual
Proceed (Y/N)
Revision 2.2
Page 5-5