Selecting The Colour Frame Phase; Selecting The Generator Framing Reference - evertz 8010-SIE Instruction Manual

3.8.4. Selecting the Colour Frame Phase

GEN COLOUR PHASE
Colour phase 01

3.8.5. Selecting the Generator Framing Reference

REFERENCE MODE
Ref auto
Ref input
Ref external
For proper operation the SDI input video and the external colour reference must be
vertically in phase.
OPERATION
Model 8010-SIE Digital Source ID Encoder Manual
The GEN COLOUR PHASE menu item is used to adjust the colour
phase relationship of the timecode to the colour frame reference when
the 8010-SIE is operated in colour frame mode. This adjustment is
necessary to compensate for frame delays in digital to analog encoders
used in the system.
When the Colour Phase is set to 01 the outgoing timecode will be in
time with the 8010-SIE colour reference. The colour phase may be
adjusted by up to 4 frames in PAL and 2 frames in NTSC applications.
This menu item should be adjusted so that the timecode colour phase
is in time with the video output of an analog encoder. If the MON
analog output option is installed the colour sequence of the analog
video will be the adjusted by the colour phase offset so that it is in time
with the time code being generated. A time code analyzer such as the
Evertz Model 5300 may be used to verify the correct timing relationship
are being maintained.
The REFERENCE MODE menu item is used to set whether the internal
timing of the 8010TM will be locked to the input video or the External
Colour Reference input. The updating of the generator clock, character
displays and LTC phasing are in turn locked to the input timing of the
8010TM.
Select auto to allow the 8010TM to select its reference automatically. If
both a reference video and SDI input video are present the 8010TM will
lock to the SDI input video.
Select input to reference the 8010TM to the input video.
Select external to reference the 8010TM to the colour reference input.
This setting will allow the LTC phase output of the 8010TM to remain
locked to the reference when an SDI input signal is not present.
Revision 2.2
Page 3-21