The Character Window Pushbutton Group; The Function Button Group; An Overview Of The Status Indicators - evertz 8010-SIE Instruction Manual

3.1.2. The Character Window Pushbutton Group

CHAR GEN WINDOW
Use the arrow keys to move the window, use the CHAR GEN ON/OFF key to turn the
window on or off. Press the WINDOW key again to select the SRC ID VCG window. Press
the WINDOW key again to select the next window and so on. The 8010-SIE returns to the
normal VCG display mode after the last window has been selected. Some windows are only
available when the 8010-SIE is in LVS mode.
CHAR GEN ON/OFF
mode the CHAR GEN ON/OFF key is used to turn individual windows ON and OFF.

3.1.3. The Function Button Group

BYPASS Is used to enable and disable the SDI bypass relay. To activate the bypass relay press
SHIFT + BYPASS. The BYPASS indicator is ON when the bypass relay is enabled. To de-
activate the bypass relay press BYPASS or SHIFT + BYPASS.
DISPLAY Selects what data is being displayed on the front panel. Each time it is pressed it cycles to
the next display data. There are also some extended displays which are accessible by
pressing the SHIFT + DISPLAY keys. See section 3.2 for more information about the front
panel displays.
VITC GEN Is used to turn the VITC generator on and off. The VITC indicator is ON when the VITC
generator is enabled. The time and user bits of the VITC generator are the same as for the
LTC generator.
HOLD When the generator is displayed on the front panel, pressing the HOLD key stops the
generator time from incrementing when the unit is operating in the TIME SID mode.. A
special character ( H ) appears to the left of the numeric display on the front panel,
indicating that the display is in Hold mode.
generator incrementing.
STATUS Displays the current operational modes of the 8010.

3.1.4. An Overview of the Status Indicators

There are 8 status indicators located on the front panel that show operational status of the 8010-SIE at
a glance.
BYPASS Indicates that 8010-SIE is operating in the Bypass Mode. The SDI video input is directly
connected to the SDI Bypass output and the 8010-SIE will have no effect on the video
signal.
COLR Indicates that the 8010-SIE is receiving a valid colour frame reference and is operating in
the colour frame mode.
OPERATION
Model 8010-SIE Digital Source ID Encoder Manual
Initiates VCG window select mode and highlights the Time VCG window.
Turns the character generator ON and OFF. When in the VCG window select
Revision 2.2
Pressing the HOLD key again starts the
Page 3-3